Unpacking your V-One

Once you've opened the box, remove the layers of foam one by one. Place them aside for now, and remove the V-One from the box. Avoid picking the V-One up by the bridge. Instead, use two hands and lift it from the base.

The V-One comes with all the tools and accessories you need to get started: 

Printer Anatomy

Take some time to get comfortable with the parts of the V-One. We will be working

with them over the next couple of sections.

Probe:

Dispenser:

V-One:

Assembly

The V-One comes with 2 identical dispensers for the 2 ink cartridges: conductive

ink and solder paste. Now that you are familiar with the parts, you can start

assembling the V-One dispensers.

1. 1. Remove the dispensing cap from the cartridge sheath. Remove the green lids from the conductive ink cartridge.
2. 2. Insert conductive ink cartridge into the sheath with the ink level visible through the viewing window.
3. 3. Twist the dispensing unit back into the cartridge sheath.
4. 4. Carefully twist the nozzle onto the end of the cartridge.

The conductive ink cartridge is used in the video. The same procedure applies for

assembling the solder paste dispenser.

Software Installation

Visit our downloads page to download and install the latest V-One Desktop application and drivers. 

Setting Up Your V-One

Find a spot for your V-One.

• A flat, level surface with minimum vibration is optimal.
• A well ventilated area is recommended.
• Do not place the V-One on a surface that is susceptible to heat damage.
• Avoid exposure to extreme temperatures